High Angle Misalignment Spacers for Heim Joints made from zinc plated 4130 chromoly steel. Available in several sizes to fit any fabrication project. Price is for one pair of spacers, enough for one heim joint.
Be sure to choose the correct size and quantity before ordering!
50 Caliber Racing 30 inch LED Curved (radius) Light Bar
Curved bars offer a better beam pattern and more closely match the roofline of most vehicles. Featuring 3 watt Cree bulbs and an IP68 waterproof housing for maximum performance and durability.
- ATV and UTV
- 4x4
- Rock Crawling
- Sand Rail / Dunes
- Snow Plow
- Construction
- Heavy Equipment
- Farm Equipment
- Towing
- Emergency Response
50 Caliber Racing aluminum skid plate. Protect your motor before its too late. Fits all Honda crf xr 50 and 70s.
Honda xr50, crf50, and xr70.
NOTE**** These skid plates all have blemishes in them. They were not packaged good and all have minor scratches and or dings in them.
Radius Light Bar Mounting Brackets for RZR XP1000 and S 900 that have after market roll cages
Clamp on brackets allow you to brow mount a 40" Curved LED light bar on your RZR XP1000 or S 900 After Market Roll Cage. USA made from 1/8" steel plating and 1.75" split tube clamps with a black powdercoat finish. These brackets provide a very stiff, solid mounting point at the top of your A pillars for insanely powerful LED lighting.
Now you can take the whole family on UTV adventures! Upgrade your 4 Seat Teryx with a middle seat made just for kids, 60 lbs or less! Designed to mount over the middle bump between REAR stock seats. Installation is quick and easy using existing hardware. Durable and supple vinyl cover with pass through slot for the included 4 point safety harness. Several harness colors to choose from.
Be sure to select harness color before ordering!
This Kit will allow you to mount 6 switches across the dash of your RZR Ride Command. Our 6061 Billet Aluminum CNC Dash Panels are machined then powder coated here at 50 Caliber Racing and were designed to give your XP1000 that unique custom look.
*When ordering please select if you want to included Switches.
16 Tapered Splined Lug Nuts with Chrome Finish and Anodized Aluminum Spike - 3/8 x 24 Thread Pitch
Be sure to select color before ordering!.
50 Caliber Racing Performance Pipe. This pipe will add horse power and give your 50 a great sound. Header tube is 1" inside diameter all the way to the muffler. Pipe will bolt right up to the stock mounts on header and the rear of the frame. Muffler is solid aluminum and comes polished, red, or black. Fits crf and xr50s.
DISCONTINUED
50 Caliber Racing rod end fabrication kit featuring 3/4" x 3/4" chromoly / PTFE liner heim joints. Fits 1.75" OD tubing, with wall thickness of .095 or .120. Includes four LH, four RH heim joints, jam nuts, and matching bungs. Available with or without high misalignment spacers.
Be sure to choose tubing wall thickness and misalignment spacer options before ordering!
50 Caliber Racing Steel Weld In Bung.
Heavy duty weld in bung. Used for fabricating custom tie rods, control arms, sway bar links and more. Center hole is threaded all the way through for maximum strength. Available in right or left hand thread.
Be sure to select the quantity before ordering!
50 Caliber Racing Heavy Duty CNC Billet Tie Rod Kit for RZR Turbo S 2018-2019
Heavy duty, 1.125" (1 1/8") diameter rods machined in the USA from solid 6061 CNC Billet aluminum and fitted with 5/8 inch heat treated 4130 chromoly heim joints with 304 stainless clevis yoke ends to fit your specific steering rack. These are the strongest type of rods you can get, and they are practically bulletproof!
Be sure to choose finish before ordering!
Lower Door Skin inserts for Can-Am Maverick X3 MAX 4 Seater Models
Stock half doors leave you vulnerable to sand, rocks and brush that can enter the cab which can be annoying and even dangerous. Cover up those gaping holes and make your X3 a safer ride for you and your passengers. Made in the USA from heavy 16 gauge aluminum sheeting, with matte black finish to blend in to any color scheme. Installation is quick and easy, using included and existing hardware. For 4 seat models only.
RZR XP Turbo Heavy Duty Tie Rod Kit (fits 2017 Turbo, 2 and 4 seat models) & 2017.5+ XP1000
Stock tie rods will not hold up to aggressive driving. Our heavy duty, 1.125" diameter rods are machined in the USA from 6061 CNC Billet aluminum and fitted with 5/8 inch heat treated 4130 chromoly heim joints coupled with 304 stainless clevis yoke ends to fit your steering rack. Available with black powdercoat or raw (no finish).
Be sure to specify finish before ordering!
KTM 50 Water Cooled Top End Cylinder Kit 2002-2008
DISCONTINUED
Complete top end rebuild kit for your KTM 50 Pit Bike! Our kits are high quality, complete and ready to build right out of the box. You'll be able to take confidence that you'll have the precision components you need to get your toys running again, the right way.
Stage 2 88cc Big Bore kit for Honda xr70 and crf70 all years
- 20mm Carburetor kit
- Performance camshaft
- Lightweight aluminum cylinder with steel sleeve
- Cast in mounts on cylinder for aftermarket skid plates
- Oversized cooling fins on cylinder for efficient heat dissipation
- High compression 52mm piston with rings, pin, & clips (you can still run pump gas)
- Head gasket kit
6 Switch Billet Aluminum CNC Dash panel upgrade for your RZR XP 1000. This panel adds additional switches to your RZR for lights and accessories and gives you a very cool custom look. Made in the USA!
