Home

Best sellers

Active filters

  • Dzus Tab Plate Kits - Dimpled Center

    Dzus Tab Plate Kits - Dimpled Center

    Price $25.99

    50 Caliber Racing Dzus tab kits are just what you need to attach aluminum panels when fabricating custom doors, roof, bed, fenders, dash panels and more. The tabs in our kits come already assembled, with the spring pre-riveted to save you time. Tab edges are rolled for easy placement and flat head 1/4 turn button fasteners in 7/16 diameter allow for a clean, sleek, professional look. 

    Be sure to choose kit size before ordering!
  • 2pc LED Pod Lights

    2 inch LED Pod Lights

    Price $99.99

    2 inch LED Pod Lights

    50 Caliber Racing LED Pod Lights are a great way to add some high powered auxiliary lighting to your car, truck, UTV, or any other vehicle. These lights can withstand anything that you can throw at them: sand, desert heat, dirt, mud, monsoon ranis, blizzard snow or any of mother nature's extreme fury.
  • OEM Polaris Primary Clutch Spring for RZR XPT 2017-2020

    OEM Polaris Primary Clutch Spring 7044762 for RZR...

    Price $49.99

    Genuine Polaris OEM Primary Clutch Drive Spring 63-140, Part 7044762 for RZR XP Turbo 2017-2020

    This is a genuine OEM Polaris primary clutch drive spring, 63-140, part # 7044762. Spring rate of 63-140. Many clutching issues can be traced back to a worn primary spring. Replace your worn spring with an OEM factory correct part.
  • Blue Zombie Face On/Off Rocker Switch Waterproof Design

    Zombie Face On/Off Rocker Switch Waterproof Design

    Price $21.99

    50 Caliber Racing ON/OFF Waterproof Rocker Switch, LED Backlit with Custom Etched Design

    "Zombie Face"

    High quality single pole, single throw ON/OFF rocker switch, a 20 amp switch for 12 or 24 volt system. LED Backlit Illumination with a custom etched design, guaranteed to put smile on your face.

    Be sure to choose color before ordering!
  • OEM Polaris RZR 800 Front Gear Case Differential

    OEM Polaris RZR Front Gear Case Differential 1337133

    Price $1,599.99

    Brand New Polaris OEM Factory Replacement Front Gearcase differential 1337133 for Polaris RZR 570 800 and 900, Ranger 1000, and Ace . Genuine OEM Factory Polaris Part. Brand new, not rebuilt. Replaces the following part numbers:  1332842, 1332923, 1333104, 1333105, 1333285, 1333750, 1334309, & 1334266
  • Seat Belt Bypass Plug for CAN-AM Commander, Maverick X3, Defender UTVs

    Seat Belt Bypass Plug for CAN-AM Commander, Maverick X3

    Price $14.99

    50 Caliber Racing Seat Belt Bypass Override Plug for Can-Am Commander, Maverick and X3 UTVs 2010+. This simple device will override the factory speed limiter, allowing you to install an aftermarket harness for better safety and comfort. Installation could not be easier. No cutting or splicing required, just plug it in and go!
  • Seat Belt Bypass Plug for Polaris RZR XP 1000, Turbo S,Turbo R, RS1, Pro XP, Pro R, Slingshot

    Seat Belt Bypass Plug for Polaris RZR, Ranger, RS1,...

    Price $14.99

    50 Caliber Racing Seat Belt Bypass Override Plug for Polaris RZR and Ranger UTVs 2015+. This simple device will override the factory speed limiter, allowing you to install an aftermarket harness for better safety and comfort. Installation could not be easier. No cutting or splicing required, just plug it in and go!
  • Quick Release Fire Extinguisher Mount

    Quick Release Fire Extinguisher Mount

    Price $39.99

    50 Caliber Racing Quick Release Fire Extinguisher Mount . Two piece design with stainless hardware and multiple points of contact for rattle free reliable performance. Stainless catch pins resist corrosion. Just pull the large red knob to release, and your extinguisher is ready to use. Mounts directly to any size roll bar, or can be bolted down to any surface. Works great with most 3-3.5" diameter bottles 
  • Wheel Spacer 8x170mm 14x1.5mm Studs

    Wheel Spacer 8x170mm 14x1.5mm Studs

    Price $46.00

    50 Caliber Racing - 8x170mm Wheel Spacer

    - Will fit most vehicles with 8x170mm bolt pattern, see below for more fitment information
    - Available in 1.5, and 2.0 inch widths

    Price is for a single wheel spacer.

    Please choose size and quantity before ordering
  • 3 Piece Laser Cut Steel Grille RZR PRO R & Turbo R Red Powdercoat

    3 Piece Laser Cut Steel Grille RZR PRO R & Turbo R

    Price $189.99

    50 Caliber Racing Laser Cut Steel 3 Piece Grille Kit for 2022+ RZR PRO R & Turbo R 2 and 4 seat models

    Add a unique honeycomb look to your RZR with our custom laser cut steel grille kit. This is a 3 piece design for the entire front end of the car, which transforms the look of your RZR drastically. Featuring a two tone powdercoat finish, this kit includes stainless steel fasteners. If you want to stand out from the crowd this is the grille for you. Available in  Red, White, or Clear over Raw with a Black accent panel.


    Be sure to select color before ordering!
  • OEM Polaris Primary Clutch 1327152 RZR XP Turbo, Turbo S 2021 ONLY

    OEM Polaris Primary Clutch 2211626 RZR XP Turbo,...

    Price $699.99

    Genuine OEM Polaris Primary Drive Clutch part number 2211626. There are many offshore aftermarket replacements available at a better price, but none of them can match the quality of Polaris OEM clutch parts.  Replaces OEM part #s: 1327153, 1327152. This clutch includes spring and weights, tuned specifically for 2021 RZR XP Turbo / Turbo S models only.
  • OEM Polaris Primary Drive Clutch 1323317 - XP1000 2019+, General 2020+

    OEM Polaris Primary Drive Clutch 1323317 - XP1000 2019+

    Price $691.49

    Polaris Primary Drive Clutch, OEM part number 1323317. This is a Genuine OEM Polaris Part. There are many offshore aftermarket replacements available at a better price, but none of them can match the quality of Polaris OEM clutch parts. We recommend stock clutch parts for longevity and reliability. See below for fitment.
  • RZR PRO XP Tubular Front Bumper - Black powdercoat finish

    RZR PRO XP Front Bumper

    Price $209.99

    50 Caliber Racing Tubular Front Bumper for Polaris RZR PRO XP,  Fits 2 & 4 Seater. Protect your RZR with our heavy duty tubular steel bumper. Fully welded construction. Durable powdercoat finish, tabs for a 6" light bar [5045B], and CNC machined end caps.

    Be sure to choose color before ordering!
  • 50 Caliber Racing - PAIR of Bluetooth Spiral LED Lighted Whips

    PAIR of 50 Cal Spiral LED Lighted Whips with...

    Price $210.00

    This pair of 50 Caliber Racing LED lighted whips are super bright and fully adjustable with over 300 different strobe effects & light patterns, and 20 different color options. Comes with a remote control or you can use the bluetooth app on your smart phone. Quick connect base and flexible water/sand proof outer casing. Each whip comes with a 50 Cal Flag and swivel clip mounts. Available in 2, 4 and 6 foot lengths.

    Be sure to choose length when ordering!
  • Can-Am X3 Light Bar Brackets Made from 1/8" Steel

    Can-Am X3 LED Light Bar Brackets

    Price $34.99

    50 Caliber Racing LED Light Bar Mounting Brackets for 2016+ Can-Am X3. USA made bolt on brackets allow you to brow mount a 50" straight LED light bar on your Can-am X3. Purchase brackets only or as a combo with a 50" LED light bar.

    Be sure to choose a lighting option before ordering!

  • OEM Outer Clutch Cover 2018+ Polaris RZR XPT RS1
    • Out-of-Stock

    OEM Polaris Outer Clutch Cover 2637068 RZR XPT Turbo...

    Price $200.99

    Polaris OEM Factory Replacement Outer Clutch Cover, Part #2637068 for RZR XPT 19-up, Turbo S, RS1. Genuine OEM Polaris part number 2637068. This is a brand new factory part. Fitment is specific, contact us if you need help to verify before purchasing.
  • OEM Spec Honda CT70 Piston Kit Complete

    Honda CT70 ATC70 Standard Bore 47mm Piston Kit

    Price $45.99

    50 Caliber Racing 47mm Standard Bore Piston Kit for Honda C70 CT70 CL70 SL70 XL70 ATC70 vintage pit bikes. Complete assembly including 47mm piston, wrist pin, rings and circlips. Replaces oem Honda part number 13101-087-000.
  • RZR PRO XP Vented Exhaust Cover - Replaces stock plastic muffler cover

    Polaris RZR Pro XP Vented Exhaust Cover

    Price $149.99

    Custom vented exhaust cover for Polaris RZR PRO XP. Get rid of the ugly stock plastic rear "bumper" panel and add a more aggressive look to your RZR. Black powdercoat steel frame with honeycomb mesh allows for increased cooling, better departure angles, and some killer unique style. CNC laser cut from thin gauge sheet steel with 50 Caliber Racing logo at the bottom. 100% made in the USA!