XP900 Roll Cage LED Light Bar Mount Rack and 30" LED light bar COMBO
DISCONTINUED
Includes mount and light bar. Bolts on to factory cage for 2 or 4 seat models.
Fits the following Polaris models:
XP900 (2011-2014)
800, 800s (2008-2015) 570 (2012-2015)
50 Caliber 1.5 inch wheel spacers 4x110mm with 10x1.25 pitch stud
- 6061 Billet Aluminum
- 1.5 inch thick
- Hubcentric design
- Lifetime warranty
- nuts to mount spacer to vehicle included
- Easy installation
- Fits all Yamaha Rhino and 4x110 vehicles
Price is for a single wheel spacer.
6 Switch Billet Aluminum CNC Dash panel upgrade for your RZR XP 1000. This panel adds additional switches to your RZR for lights and accessories and gives you a very cool custom look. Made in the USA!
Procom Yamaha Rhino 700 Performance CDI box. This fully reprogrammable high performance ECU is a direct plug-in-&-go type, not a piggyback.
DISCONTINUED
- 12x8 Beadlock wheel
- 4x156mm pattern
- 4/4 offset
- 6061 heat treated aluminum
- .190 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Polished finish
- Reinforcement ring on inside of rim
- 11.7 lbs
Out of stock and discontinued
Upgraded Tapered Roller Bearing Headset for Honda 50cc to 200cc Pit Bikes. The stock steering bearings in Honda pit bikes tend to wear out quickly. If you are an aggressive rider, or you race, your bearings are probably already failing. These aftermarket tapered roller bearings are a great upgrade over stock. They are much stronger and take a ton of abuse. They are great for larger riders too. Includes upper and lower tapered bearings and races.
12 Way Standard LED Circuit Screw Fuse Block with Ground Terminals
This fuse box is suitable for all kinds of automotive and marine applications, including 6V, 12V & 24V systems (maximum voltage 32V). Each fuse holder is designated a custom label for identification and to make fuse installation as easy as possible.
50 Caliber Racing Steel Weld In Bung for 1" ID Round Tube - 5/8-18 Threaded Through
Heavy duty weld in bung with 5/8-18 threaded center hole. Used for fabricating custom tie rods, control arms, sway bar links and more. Center hole is threaded all the way through for maximum strength. Designed to slip fit into 1.25" OD .120 wall round tubing with an ID of 1". Available in right or left hand thread.
Be sure to select thread direction and quantity before ordering!
Custom Bolt-on Roof Rack System for Polaris XP1000 & XP Turbo 2 Seat
Add some serious cargo space to your RZR with this custom roof rack system. Hand welded steel 1.25" main tubes and a sheet steel floor which doubles as a full roof. Integrated LED bar and pod light tabs. Room for cooler, camping gear, tools and more! Available as roof rack only, or you can add light bar and pod lights for a complete system.
Be sure to select lighting option before ordering!
Roll Cage Harness Bar for 2016 Can-Am Commander 4 Seat UTV
Can-am factory roll cages do not have any provision for 4 point safety harnesses. The 50 Caliber Racing Roll Cage Harness Bar clamps to your factory cage, allowing you to mount saftey harnesses on all 4 seats.
This fits the 2016 Commander models ONLY.
Polaris Sportsman 500 ATV Top End Cylinder Rebuild Kit
50 Caliber Racing stock bore size replacement kit. Includes all gaskets and components necessary to rebuild your top end. Manufactured to OEM spec, our kits are complete, high quality and will extend the life of your toys for many more years of enjoyment.
LED Light Bar Mounting Bracket COMBO for Yamaha Rhino - Includes Brackets and 50" Straight LED Light Bar
50 Caliber Racing - 6 x 135mm Wheel Spacer - Ford 6 Lug 1999-2014
- Will fit most vehicles with 6 x 135mm bolt pattern, see below for more fitment information
- Available in 1.0, 1.25, 1.5, and 2.0 inch widths
Price is for a single wheel spacer.
Please choose size and quantity before ordering
Tie Rod End Kit for Suzuki LT250 ATV
High quality aftermarket tie rod ends from 50 Caliber Racing. Includes 1 inner and 1 outer ends and hardware. This kit is for one side only. If you need to replace both left and right sides, you must order 2 kits.
Polaris RZR XP1000 CNC Billet Aluminum Center Dash Panel. This price is for the bottom center piece only.
Polaris RZR XP1000 CNC Billet Aluminum Center Dash Panel. This is for 1 bottom center plate only.
2 x 26x9x12 inch
2 x 26x11x12 inch
50 Caliber Racing 6 ply Radial off road racing tires. These tires are great for all terrains. 6 ply are extremely hard to blow out or punture. The non-directional pattern provides predictable cornering and claws up roots and rocks, creating optimum climbing confidence.
- 12x10 Beadlock Wheel
- 4x115mm pattern
- 4/6 offset
- 6061 heat treated aluminum
- .190 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Powdercoat finish
- Reinforcement ring on inside of rim
- 12.5 lbs
- 12x8 Beadlock wheel
- 4x110mm pattern
- 4/4 offset
- 6061 heat treated aluminum
- .160 thickness
- Polished billet aluminum beadlock ring
- Added security and strength
- Polished finish
- Reinforcement ring on inside of rim
- 10.2 lbs
DISCONTINUED
